home *** CD-ROM | disk | FTP | other *** search
-
-
-
-
-
-
- README.DOC
-
- This file contains details of the latest changes to the
- program, that were made since the instruction manual was
- last revised.
-
- It also contains instructions on installing BIBLOGIC.
-
-
-
-
- VERSION 3.01
-
- BIBLOGIC is distributed in two forms:
-
- 1) DISTRIBUTION DISKS. The program package is supplied on
- two 360k floppy disks. An installation program is
- supplied to simplify decompression and installation on
- a hard disk. Follow the instructions below.
-
- 2) BULLETIN BOARD FILES. The program is supplied in the
- form of two compressed files. Together, these files
- contain all of the files on the distribution disks
- except the installation program, which is not required.
- Follow the instructions below.
-
-
-
-
- QUICK START INSTRUCTIONS - DISTRIBUTION DISKS
-
- To install BIBLOGIC from distribution disks into
- C:\BIBLOGIC, put the first distribution disk in drive a: and
- type:
-
- A:INSTALL
-
- then press <Enter>. Follow the on-screen instructions. When
- prompted, insert the second disk.
-
- It is recommended that you run the demo program included in
- the distribution package. The installation program gives
- instructions.
-
-
-
-
-
-
-
- QUICK START INSTRUCTIONS - BULLETIN BOARD FILES
-
- To install BIBLOGIC from BBS files, do the following:
-
- 1) Create a directory on your hard disk called "BIBLOGIC".
-
- NOTE: It is possible, but not as straightforward, to
- install BIBLOGIC in a subdirectory with a name other
- than "BIBLOGIC". To run BIBLOGIC successfully, you will
- need to read the appendices in the manual.
-
- 2) Decompress both of the distribution files into the
- BIBLOGIC directory.
-
- 3) Check that the CONFIG.SYS file on your boot drive has
- at least FILES=20 and BUFFERS=15. Reboot your system if
- you change CONFIG.SYS.
-
- It is recommended that you run the demo program included in
- the distribution package. After uncompressing the files, go
- to the BIBLOGIC directory and type DEMO<Enter>.
-
-
-
-
- UPDATING FROM A PREVIOUS VERSION OF BIBLOGIC
-
- If you are updating from a previous version, you need only
- the following files:
-
- DEMO.BAT
- BIBLOGIC.DBD
- *.EXE
- *.OVL
- Any new .PFF files you wish to use.
-
- The easiest way to update the system is to install the new
- system in a temporary directory (other than where the old
- system is installed) and then copy over the files you need.
-
- It is strongly recommended that you make a complete backup
- of your existing BIBLOGIC installation before attempting to
- update to the latest version.
-
- It is recommended that you run the demo program included in
- the distribution package. After updating, go to the new
- BIBLOGIC directory and type DEMO<Enter>.
-
-
-
-
-
-
-
- MANUALS
-
- MANUAL.DOC contains the BIBLOGIC instruction manual.
- SUPPL.DOC contains a supplement to the manual.
- README.DOC is this file.
-
- All of these files are in raw ASCII form and may be printed
- on any ASCII printer with 80 or more columns and 66 or more
- lines per page. The files contain form-feed characters
- between pages and use back-space characters for underlining
- and bold.
-
- To print these files, copy them directly to your ASCII
- printer or use the DOS print utility. For example:
-
- COPY *.DOC LPT1:
- or
- PRINT *.DOC
-
- NOTICE
-
- This program is produced by a member of the Association of
- Shareware Professionals (ASP). ASP wants to make sure that
- the shareware principle works for you. If you are unable to
- resolve a shareware-related problem with an ASP member by
- contacting the member directly, ASP may be able to help. The
- ASP Ombudsman can help you resolve a dispute or problem with
- an ASP member, but does not provide technical support for
- members' products. Please write to the ASP Ombudsman at 545
- Grover Road, Muskegon, MI 49442 or send a CompuServe message
- via CompuServe Mail to ASP Ombudsman 70007,3536.
-
- ADDRESS
-
- Biblogic Computer Services can be contacted at:
-
- Biblogic Computer Services
- P.O. Box 1424
- Thousand Oaks
- CA 91358-0424
- U.S.A.
-
- *** NEW *** Fax and CompuServe numbers (not shown elsewhere
- in the documentation):
-
- Fax: 1 (805) 493 0364
- Compuserve: 75020,556
-
-
- This file contains details of the latest changes to the program,
- that were made since the instruction manual was last revised.
-
- It also contains instructions on installing BIBLOGIC.
-